Manualshelf

User manual

ManualsBrandsEminent ManualsNetworkingEM4544
51525354555657585960
25
|
ENGLISH
Hint: If you do not exactly know the speed of your internet connection please contact
your Internet Service Provider. Your provider will usually speak in term of MB. This
value is in Mbits. 1 MB=1024 Kbit. You can use both values in the webpage of the
router.
To set up a rule, use the following steps:
1. Choose ‘User Defined’ at the ‘QoS Setup’ field’.
2. Choose ‘Max Limit’ to set the maximum speed limit.
3. Choose ‘Min Guarantee’ to set a minimal guaranteed speed.
4. Fill out the values a the ‘Download’ en ‘Upload’ field.
5. Fill out the IP-address or IP-area in the ‘IP’ field for which this rule is applied.
6. Fill out the protocol in the ‘Protocol’ field. (If unknown, leave this field empty.)
7. Fill out the port numbers at the ‘External Port’ field. (If unknown, leave this field
empty.)
8. Click ‘Apply’ to add this rule.
Example: 10Mbit / 1Mbit DSL connection.
Problem: When PC1 starts to download, the internet connection gets
slow or sluggish.
Suggestion: Set PC1 to ‘Max Limit’ and set a maximum of 5000 Kbit download
and 512 Kbit upload.
Problem: During online play with PC, PS3 or Xbox360 the screen freezes or
strange artifacts appear on screen. This is so called ‘lag’, caused
by others computers which are using the internet connection
intensively.
Suggestion: Set PC, PS3 or Xbox360 with ‘Min.Guarantee’. Use the values
3000 Kbit download and 640Kbit upload.
Hint: The QoS rules are handled by the router from the top of the list to the bottom of
the list.
10.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com for more information about
your product.
If available, firmware updates will be downloadable using your computer’s web
browser. After downloading the firmware file(s), the downloaded file(s) need to be
unpacked. The firmware file(s) and ‘Readme’ files will be available after unpacking.