Operation Manual

ENGLISH

8. Click ‘Apply’ to save and apply the configuration.

9. After the settings have been applied, the EM4592 will reboot and connect to your

wireless router.

Note: The EM4592 now has the same SSID (no longer “Eminent_repeater”) as the

wireless network you connected to in the previous step. Make sure you are connected

to the Repeater and not to your wireless Modem/router. SSID + (2.4GHz/5GHz) + (R)

You can only access the “User Interface” of the EM4592 if you are connected directly

to the repeater.

10. Check the connection status by entering the User Interface via the browser

(10.0.10.254) and clicking “Device Status”.

Here, you can check whether a connection has been established. Refer to the

following image.