Operation Manual

ENGLISH

11. You can now connect your wireless network adapter(s) to the EM4592 as

described in chapter ‘Connecting a wireless WPS adapter to the EM4592’, or by

connecting to the WiFi connection and entering the wireless encryption key of the

wireless network you previously connected.

4.3 Manual configuration using WPS

1. Connect the EM4592 to a wall outlet (preferably close to the modem/router).

2. Wait for the signal indicator to flash green.

3. Connect to the EM4592 via WiFi SSID: Eminent_repeater or

Eminent_repeater(5G), or use the Ethernet cable to connect to the EM4592

directly.

4. Your device should open your internet browser and will be redirected to the

EM4592 repeater’s user interface. (If in any case it doesn’t, type http://10.0.10.254

in your internet browser and then hit Enter).

5. Select “WPS” from the menu.

6. Select the desired band (2.4GHz or 5GHz) you wish to use between your EM4592

and your modem/router.