Operation Manual

ENGLISH

7. Select the left icon displaying the EM4592 and a modem/router.

8. Now the EM4592 will try to connect to your modem router (max. duration 2

minutes)

9. Press the WPS button on your modem/router for approx. 5 sec. (Eminent

modem/router)(for other brands of modem/routers please refer to the manual of

your modem/router for the exact procedure).

10. If the connection is succesfull the EM4592 will reboot and your WiFi client will no

longer be connected to the SSID ‘Eminent_Repeater’ or

‘Eminent_Repeater(5G)’

Note: If the WPS button is used, the SSID and network key and frequencies are the

same as used on your wireless router. Some WPS routers will change their original

SSID to another SSID if WPS is used. In this installation guide, the SSID of the

wireless router is ‘Eminent’.

5.0 Connecting a wireless WPS adapter to the

EM4592

5.1 Using the WPS button on the EM4592

1. Press the WPS button on the EM4592 for about 2-3 seconds.

2. Now press the WPS button on your wireless adapter.

3. If correct, the connection between the wireless WPS adapter and EM4592 will be

established. Depending on the Windows version you are using, you should see a

connected icon in the taskbar.

Note: Some wireless WPS adapters require the use of the supplied software to create

a WPS connection. Refer to the manual of your wireless WPS adapter for more

information.

Note: If you use the WPS button the devices will negotiate the Wireless settings you

will not be able to determine what frequency the devices will use. If you wish to