Operation Manual

8 | ENGLISH
3.4 Mixed WiFi clients
In most cases the Repeater will be used in mixed mode (2.4GHz and 5GHz WiFi
clients are connected to the EM4592)
Note: If possible we advise to use gaming and Video devices on the 5GHz Band and
other devices preferably on 2.4GHz to provide the best performance to these devices.
• 2.4GHz
+ best coverage
- more interference with other wireless devices
- lower bandwidth.
• 5GHz
- lower coverage
+ less interference with other wireless devices
+ higher bandwidth.
4.0 Connecting the EM4592 to your
modem/router
There are three different ways to connect your EM4592 to your modem/router.
4.1 Configure the wireless repeater using the WPS button
1. Please check if your wireless modem/router has a WPS button. Also check
whether your wireless router has a properly configured internet connection.
2. Connect the EM4592 to a wall outlet. (please place the EM4592 close to the
modem/router during setup)
3. Wait for the LED to turn green (flashing).
4. Press the WPS button on your wireless router for approximately 3 seconds*.