EM6053 Video over UTP 200m
| ENGLISH EM6053 Video over UTP 200m Table of contents 1.0 Introduction ........................................................................................................... 2 1.1 Functions and features ...................................................................................... 2 1.2 Packing contents ............................................................................................... 2 2.0 What do you need in different scenarios ................................................
| ENGLISH 2.0 What do you need in different scenarios You can use the EM6053 Video Balun Set in different scenarios. This manual will explain some scenarios. 2.1 Before you get started Before you mount the camera’s in the right place and want to connect all the wiring you should connect and try everything on a smaller scale. Just place the DVR, the camera’s and the EM6053 Video Balun Sets on your desk and connect it to the situation you desire.
| ENGLISH 3.0 UTP Pin layout The RJ45 ports on the Video Balun set have a basic layout you need to know before you connect any type of UTP cable. Figure 1. Note that you need to use straight UTP cables. Both ends need to have exactly the same color on the same position. You will get the best quality using just one Video Balun Set for one camera. It is possible to connect two or more camera’s on just one UTP cable which we will explain in this manual.
| ENGLISH 4.1 One camera and one Video Balun Set The best situation is to use one UTP cable and one Video Balun Set for each camera you want to connect. This enables you to get the best signal over the longest distance. You only need to connect the RJ-45 plugs of the UTP cable to each Video Balun, connect the Video Balun to the DVR and your camera and you are done. In this situation both power and video will be transported over the UTP cable. So you do not need a separate power adapter. Figure 2. 4.
| ENGLISH Brown/White cable to connect to the 485B socket of the camera. Note that you do not need to connect this pair to the RJ-45 plug. This pair needs to be connected separately to both the EM6029 and the DVR. Figure 4. 4.3 Two camera’s and two Video Balun Sets It is possible to get both power and video signals for two camera’s over just one UTP cable. Every camera needs four wires, one pair for video and one pair for power. Figure 5. Connect two Video Balun sets to both ends of the UTP cable.
| ENGLISH Note that you cannot power all three camera’s using the optional pair. You need three power adapters to locally supply power to each camera. For example the EM6060 power adapter. Figure 6. Connect three Video Balun Sets to both ends of the UTP cable. Connect each Video Balun Set to one camera and to one channel of the DVR. 4.5 Four camera’s and four Video Balun Sets In this scenario, you can connect four camera’s to transport the image of these camera’s to your DVR.
| ENGLISH 5.0 Frequently Asked Questions and other related information The latest Frequently asked questions for your product can be found on the support page of your product. Eminent will update these pages frequently to assure you have the most recent information. Visit www.eminent-online.com for more information about your product. 6.0 Service and support This users manual has been carefully written by Eminent’s technical experts.
| ENGLISH Also, you will find frequently asked questions in the FAQ section. It is highly recommended to consult the FAQ section. Very often the answer to your questions will be found here. 8.0 Warranty conditions The five-year Eminent warranty applies to all Eminent products, unless mentioned otherwise before or during the moment of purchase. After buying a second-hand Eminent product the remaining period of warranty is measured from the moment of purchase by the product’s initial owner.