Operation Manual

4 | ENGLISH
3.0 UTP Pin layout
The RJ45 ports on the Video Balun set have a basic layout you need to know before
you connect any type of UTP cable.
Figure 1.
Note that you need to use straight UTP cables. Both ends need to have exactly the
same color on the same position.
You will get the best quality using just one Video Balun Set for one camera. It is
possible to connect two or more camera’s on just one UTP cable which we will explain
in this manual. Take notice that one pair of power as drawn in Figure 1 will not be
used when connecting two or more camera’s. This also might influence the signal
quality over a longer distance.
4.0 How to connect a Video Balun Set
indifferent situations
You can use the Video Balun Sets in different situations and to connect one or more
devices. In this manual we will explain the most common used situations. In all these
situations we will use just one UTP cable (EM6062).
Note! All chapters below will describe just one side of the cable. You need to mirror
the situation on the other side of the cable as well to have a working connection in
each situation.
In most situations described in the next chapters you will need to strip the UTP cable
and you will need to connect RJ-45 plugs on each side. If you only connect just one
camera, you do not need to strip the UTP cable.