Operation Manual

5 | ENGLISH
4.1 One camera and one Video Balun Set
The best situation is to use one UTP cable and one Video Balun Set for each camera
you want to connect. This enables you to get the best signal over the longest distance.
You only need to connect the RJ-45 plugs of the UTP cable to each Video Balun,
connect the Video Balun to the DVR and your camera and you are done.
In this situation both power and video will be transported over the UTP cable. So you
do not need a separate power adapter.
Figure 2.
4.2 Connect a EM6029 30x Optical Zoom camera with one
Video Balun Set
In this situation 2 pairs of the cable will not be used. If you have a camera with Pan,
Tilt and/or Zoom function, you can use one or both unused pair(s) to control the
camera.
Strip the UTP cable (for example the EM6062) and use 2 pairs of cable. One pair
needs to be used for the video signal (for example Blue and Blue/White). The other
pair needs to be used to power the camera (for example Green and Green/White).
Figure 3.
For example, if you need to connect a EM6029 30x Optical zoom camera, you can
use the Brown cable to connect to the 485A socket of the camera. And use the