Operation Manual

6 | ENGLISH
Brown/White cable to connect to the 485B socket of the camera. Note that you do not
need to connect this pair to the RJ-45 plug. This pair needs to be connected
separately to both the EM6029 and the DVR.
Figure 4.
4.3 Two camera’s and two Video Balun Sets
It is possible to get both power and video signals for two camera’s over just one UTP
cable. Every camera needs four wires, one pair for video and one pair for power.
Figure 5.
Connect two Video Balun sets to both ends of the UTP cable. Connect each Video
Balun set to one camera and to one channel of the DVR
4.4 Three camera’s and three Video Balun Sets
If you want to connect three camera’s, you need 3 pairs of the UTP cable. Each pair
need to go to every camera you want to connect. You also need 3 RJ-45 plugs on
both ends. you can use the unused pair for zoom and focus (if you use a EM6029 for
example).