Operation Manual

7 | ENGLISH
Note that you cannot power all three camera’s using the optional pair. You need three
power adapters to locally supply power to each camera. For example the EM6060
power adapter.
Figure 6.
Connect three Video Balun Sets to both ends of the UTP cable. Connect each Video
Balun Set to one camera and to one channel of the DVR.
4.5 Four camera’s and four Video Balun Sets
In this scenario, you can connect four camera’s to transport the image of these
camera’s to your DVR. In this case you also need four power adapters to provide
power for each camera on the spot.
Figure 7.
Note that you will need to power the four camera’s on the spot using four separate
power adapters (EM6060 for example).
Connect four Video Balun Sets to both ends of the UTP cable. Connect each Video
Balun Set to one camera and to one channel of the DVR