Operation Manual

5 | ENGLISH
The major components on the bottom of the EM6225 are:
1. Reset button – this is the button to reset the EM6225 to default factory settings.
You need to use a small stick like pencil or tooth stick to press the reset button for
more than 15 seconds to enable the reset function. Please refer to section 7.0 for
more details.
2. Bracket screw – this is the position to screw in the bracket of the EM6225. With
the bracket, you can install the EM6225 on the wall.
2.0 Installing the camera
A few short and simple steps are necessary to connect and assign the camera, and to
enjoy the use of the camera. Use the following steps to connect the camera.
2.1 Connecting the camera to your network using a
network cable
We advise to connect the camera first with a network cable. Once the camera works
correctly, you can use your wireless network.
1. Connect the camera to a power outlet using the supplied power adapter.
2. Connect the camera to your router or switch using the supplied network cable.