Operation Manual

7 | ENGLISH
2.2.1 Delete the camera from the APP
To delete a camera from the camera list. Press “Edit”
Slide the camera you wish to delete from right to left, the “Delete” button will appear.
Press the “Delete” button to remove the camera from the list.
2.3 Installing the software and camera on a PC or
notebook (Windows).
Before you can view the video of the camera, you need to install the software ”e-
CamView” from the CD-ROM.
1. Insert the CD in the CD-ROM.
2. If auto-run is enabled the Wizard should start.
3. Run the wizard to install the application e-CamView.
4. The application is installed on the PC
5. Open “e-CamView”. (If prompted with a screen about the firewall click “always
allow”).
6. Click “Camera list” to add the camera
7. If the computer and the EM6225 is connected to the same network, the Camera
can be added by clicking “Open search tool”.
8. Click “Searching”
9. The devices are displayed with the Device ID (can be found on the bottom label or
the ID/Password Card) in the search list. You add the Camera to the device list by
double clicking the device.
10. A new window will be displayed here you can change the name of the camera and
enter the password of the camera that is printed on the ID/Password Card and
press “OK”
11. If the EM6230R1 is not in the same network as the computer you can add the
EM6230R1 manually by clicking “Camera list” followed by “Add” enter the
username “admin” and the “Device ID” in the UID field and enter the password
(you can find this information on the ID/Password Card) press “OK”.
ESS-012345-ABCDE
1234