Operation Manual

8 | ENGLISH
2.4 Adding the camera to a wireless network
There are 3 options to connect the EM6225 to your wireless network. First option is to
configure the settings by using the App. The second option is to use the software
installed on your PC (windows).
Note: The device will reboot if necessary you will hear a buzzing sound from the
speaker of the camera followed by calibration of the camera.
2.4.1 Connecting to Wi-Fi using the WPS button.
Firstly check the manual of your Modem/Router if your device supports WPS.
1. Start the WPS pairing procedure on your modem/router (check the manual of your
Modem/Router).
2. Now press the WPS button on the EM6225 and hold this button for 3~5 seconds
and release the button after this period.
3. The camera and the modem/router will now synchronize and configure the WiFi
settings (this may take a while for the configuration to be successful). The most
mode/routers have an indicator LED to indicate if the WPS synchronization is
successful.
2.4.2 Connecting to Wi-Fi using the App.
1. Ensure the camera is connected to the network with a Ethernet cable.
2. Start the App “e-CamView”.
3. Select the “Camera settings” menu by pressing the arrow next to the camera you
would like to configure.
(if prompted Login with username: (default “admin”)
Password: (default “leave blank”)
4. Select “Wi-Fi settings”
5. A list of available wireless networks will be displayed.
6. Select the wireless network you want to connect to (if not displayed press “ ”
to refresh the list)
7. Enter the wireless encryption key and press “Join”
8. Disconnect the Ethernet cable to connect to the wireless network.
2.4.3 Connecting to Wi-Fi using the PC utility (windows).
1. Ensure the camera is connected to the network with a Ethernet cable.
2. Ensure the camera is added to the device list (see chapter 2.3)
3. Double click the camera in the camera list