Operation Manual

9 | ENGLISH
4. The settings menu will be displayed
5. Go to the Menu option “Wi-Fi”
6. If necessary enable the WiFi option by enabling the selection box “using wireless
Lan”
7. Click “Scan” to search for available wireless networks, please press “Scan” if your
wireless network is not displayed (If device is just rebooted please be patient for
the device to be ready to refresh the WIFI list). Select the Wireless network you
want to connect to.
8. Enter the Encryption settings and the WPA-PSK key of the wireless network
9. Click “Set”.
10. Disconnect the Ethernet cable to connect to the wireless network.
2.5 Mounting the camera on the wall
1. Once the camera is connected correctly with your computer, you can mount the
camera on a wall or ceiling.
2. Use the mounting stand to mark the holes at the location where you want to mount
the camera.
3. Drill the holes and fill the holes with the supplied plugs.
4. Mount the bracket stand to the wall or ceiling using the supplied screws.
5. Mount the camera on the bracket.
6. Connect the power supply into the wall socket and connect the power tip to the
camera.
3.0 Viewing images
You can view the images both on your computer and on your smartphone screen, as
we explain in the sections below.
Optionally, you can install the supplied software so you can find the camera directly
with your computer and make recordings with your computer.
3.1 On your smartphone/tablet (Android, iPhone, iPad)
Start the App e-CamView press the camera-icon of the camera you wish to view. The
device will start connecting with the camera and will show live images of the camera.