EM6250HD Easy Pro View HD IP Camera
| ENGLISH EM6250HD – Easy pro view HD IP camera Table of contents 1.0 Introduction ........................................................................................................... 4 1.1 Packaging contents ........................................................................................... 4 1.2 Requirements to access the camera. ................................................................. 4 1.3 Major hardware components. .............................................................
| ENGLISH 4.10 SD-Card Playback ......................................................................................... 49 4.11 Local Search ................................................................................................. 51 4.12 Information .................................................................................................... 53 5.0 The webpage of the camera ................................................................................ 54 5.1 Login to the webpage .....
| ENGLISH 1.0 Introduction Congratulations with the purchase of this high-quality Eminent product! This product has undergone extensive testing by Eminent’s technical experts. Should you experience any problems with this product, you are covered by a five-year Eminent warranty. Please keep this manual and the receipt in a safe place. Register your product now on www.eminent-online.com and receive product updates! 1.
| ENGLISH 3. Ethernet indication LED (blue) – this LED is to indicate if the Ethernet link is ok and packet traffic is sending/receiving. When the Ethernet cable is connected, the LED is on. When there is packet sending/receiving, the LED is blinking blue light. 4. SD card indication LED(yellow) – this LED is to indicate the status of the Micro-SD card recording, it will be on when the Micro-SD card is inserted and will blink during recording. 5.
| ENGLISH 4. Reset button – this is the button to reset the EM6250HD to default factory settings. You need to use a small stick like pencil or tooth stick to press the reset button for more than 3 seconds to enable the reset function. Usually when you forgot the administrator account, you will probably need to do this reset action to reset to the default factory settings. Please refer to section 5.6.6 for more details. Major components in the back and bottom panel 2.
| ENGLISH 2.2 Connecting the camera to your network using a network cable We advise to connect the camera first with a network cable. Once the camera works correctly, you can use your wireless network. 1. Connect the camera to a power outlet using the supplied power adapter. 2. Connect the camera to your router or switch using the supplied network cable.
| ENGLISH 2.
| ENGLISH 10000000 1234 2.5 Installing the Easy Pro View App on an Apple device Before you can view the video of the camera, you need to download and install the app “Easy Pro View” from the “App Store”. 1. 2. 3. 4. 5. Download and install the app “Easy Pro View”* from the “App Store”. Open Easy Pro View. Select the “+” button to add the camera to the App. A new window opens to enter the data of the camera.
| ENGLISH Switch ON/OFF for dynamic icon update Switch ON/OFF to save admin password Click to select trigger source for alarm notification (section 4.5) *For iPad download and install Easy Pro View HD this adds the possibility to view more IP-Cams in one screen and the screen is adjusted to use in landscape mode.
| ENGLISH 2.6 Installing the software and camera on a PC or notebook (Windows). Before you can view the video of the camera, you need to install the software” Easy Pro View” from the CD-ROM. 1. 2. 3. 4. 5. Insert the CD in the CD-ROM. If auto-run is enabled the Wizard should start. Run the wizard to install the application Easy Pro View/Play. There are 2 applications installed on the PC: Easy Pro View and Easy Pro Play Open Easy Pro View.
| ENGLISH 8. Camera name: Enter a description of the camera (example: front door) 9. CamID: Enter the ID provided on the ID/Password card. 10. Password: Enter the 4 digit password provided on the ID/Password card. 10000000 1234 11. Select “OK” to add the camera. With the toolbar you can select how and the amount of video feeds you would like to view on your monitor from 1 to 36 screens. 2.7 Adding the camera to a wireless network There are 3 options to connect the EM6250HD to your wireless network.
| ENGLISH 2.7.2 Connecting to Wi-Fi using the PC (windows). 1. Ensure the camera is connected to the network with a Ethernet cable. 2. Install the software on the CD-ROM 3. Start “Easy Pro View” 4. Right click on “camera ID” in the auto search list and click “web configure” 5. Login with username: (default “admin”) Password: (default “leave blank”) 6. Click Network 7. Wi-Fi security 8. A control panel will appear for your Wi-Fi settings 9. Select enable Wi-Fi function (to activate he Wi-Fi module) 10.
| ENGLISH 6. Connect the power supply into the wall socket and connect the power tip to the camera. 3.0 Viewing images You can view the images both on your computer and on your smartphone screen, as we explain in the sections below. Optionally, you can install the supplied software so you can find the camera directly with your computer and make recordings with your computer. 3.
| ENGLISH 10000000 1234 4.0 Easy Pro View for iPhone/iPad/Android 4.
| ENGLISH Arrange the order of IP cameras Add new IP Camera Get camera information and settings Playback the recorded videos Camera List iPad Layout 4.
| ENGLISH 1. Select “camera List” 2. Select the camera you wish to view.
| ENGLISH 4.3 Delete camera Slide the camera you wish to delete from right to left, the delete button will appear. Press the button to delete the camera from the list.
| ENGLISH 4.4 Camera adjustment Press to configure the camera settings Press the blue icon as shown in above picture. Below menu will appear.
| ENGLISH 4.5 Alarm notification Select “Alarm Notification” If prompted enter username and password (By default username “admin” password “empty”).
| ENGLISH
| ENGLISH Select the trigger source and click update. If the alarm is triggered you will receive an alarm notification. As shown in below picture, press view to view the live stream including pre-recording buffer (if SD-card is installed). The temperature feature can only be used with Push Notification it’s not possible to use it as alarm trigger for E-mail notification or NAS recording.
| ENGLISH 4.6 Stream settings This option allows you to set the bandwidth and quality of the live stream of your mobile connection. In most cases the bandwidth of your mobile phone will be lower in comparison to your home internet connection. In some cases we advise you to change these values. For example your telecom provider charges you for every MB send to your phone (roaming). If you choose a lower resolution and/or frame rate the bandwidth and amount of MB will be lowered.
| ENGLISH
| ENGLISH 1. You can adjust the bandwidth from 32Kbps to 2Mbps. 2. You can choose to adjust resolution and frame rate manually or switch to Auto (recommended) 3. Change the resolution (manual) 4. Change frame rate (manual) 5. Enable/disable the microphone. 4.
| ENGLISH 4.7.
| ENGLISH Video Colour: User can set the video colour: Coloured or black and white. Brightness: Control the brightness of the camera video from 1(dark) ~ 10(Bright) level. Sharpness: Control the level of sharpness and clearness of the image. Low Light Sensitivity: The level of the camera senses the low light condition. Place: You can choose the camera installation environment in order to make camera automatically adjust for the best image quality.
| ENGLISH Control the behavior of the LEDs on the front of the camera (On/Off) The level of motion sensitivity 4.7.3 Night mode control Configure how the Night mode is controlled.
| ENGLISH Night mode by schedule. Night mode by manual.
| ENGLISH 4.7.4 Camera info View camera information.
| ENGLISH 4.
| ENGLISH 4.8.1 Information View camera information (different information as described in section 4.7.
| ENGLISH 4.8.
| ENGLISH You can select if the camera will use a Dynamic (DHCP) IP address or a Static IP address (default setting is DHCP).
| ENGLISH Switch on to enable Wi-Fi function
| ENGLISH Select the Wi-Fi network you wish to connect to.
| ENGLISH In some special situations, your network environment only provides PPPoE connection (ADSL service), there is no NAT/router available. You will then need to set the PPPoE settings. For more information see section 5.3.
| ENGLISH 4.8.
| ENGLISH Switch on to enable E-mail alarm function Select motion sensitivity and e-mail trigger source Switch on to enable E-mail sending Fill in email recipients
| ENGLISH Switch off if you want to enter a SMTP server manually.
| ENGLISH Speaker alarm Select speaker alarm trigger and how many alarm loop times. Press Alarm test to test alarm.
| ENGLISH SD-Card Switch ON and select the type of recording always/scheduled Select circular or stop recording if disk (SD-Card) space is full
| ENGLISH Scheduling
| ENGLISH Select the trigger source: Email alarm, Speaker alarm, SD-Card record
| ENGLISH Select the time period
| ENGLISH 4.9 Admin The Admin menu provides the possibility to change System date/time, Upgrade Firmware or reboot device remotely.
| ENGLISH 4.9.1 Date/time Select the time zone and press update. The IP-Camera will reset.
| ENGLISH 4.9.2 Upgrade Upgrade This function is not available please view section 5.6.4 4.9.
| ENGLISH 4.
| ENGLISH Press to view recorded files from SD-Card Select the date and time of the recorded video you wish to play
| ENGLISH 4.11 Local Search Use this option to scan your internal-network for available Easy Pro View IP camera’s.
| ENGLISH Select the camera from the list to add it to the camera list. You need to give a name to the camera and enter the password to complete the installation of the camera.
| ENGLISH 4.
| ENGLISH 5.0 The webpage of the camera The Eminent camera is also an IP camera with its own webpage. This means you can login to the webpage by using the camera’s IP Address. Use the following steps to login to the webpage and change any of the camera settings. 5.1 Login to the webpage 1. Double click the ‘Easy Pro View’ shortcut placed on your desktop. (This program has been installed and described in section 2.5). 2. The program will automatically search for your camera in your network.
| ENGLISH 5.2 Information The first page of the web configuration of the EM6250HD is the information page. You can see the model name/firmware version, CAM ID, registration status, network type and current video settings( bandwidth, resolution) in this page. The EM6250HD can be viewed remotely by the Easy Pro View software or App only when the EM6250HD is registered. If the EM6250HD is not registered, please check the Ethernet wiring of your network environment.
| ENGLISH If the Ethernet cable is unplugged, the EM6250HD will lose connection. But as soon as the Ethernet cable is plugged in again, the EM6250HD will obtain a new IP address immediately. If the network environment does not support DHCP function, you will need to set the network settings of the EM6250HD manually. Please fill in all the fields including “IP address”, “Subnet mask”, “Default gateway” and “DNS server” to let the network work.
| ENGLISH 5.3.2 Wi-Fi security You can use the wireless connection to connect the EM6250HD to the network. If your network environment has a 802.11 b/g/n router or AP running, you can click the “Enable Wi-Fi function” button to enable the wireless connection. In order to use the wireless network, you need to fill in the following fields: 1. SSID – this is the ID (name) of the wireless router or AP of your wireless network environment, this must be set correctly. 2.
| ENGLISH You can click the “Wi-Fi test” button to check if the EM6250HD can connect to the wireless network for these settings. You will need to unplug the Ethernet cable to enable the wireless connection after the “Wi-Fi test” is successful. You can click the “Wi-Fi scan” button to scan for all the available access points nearby. See figure for reference. If you want to define a fixed IP address when using a Wi-Fi connection, please click the “IP address” button and enter your preferred IP address.
| ENGLISH 5.3.3 Advanced In some special situation, your network environment only provides PPPoE connection (ADSL service), there is no NAT/router available. You will then need to set the PPPoE settings in the “Advanced Network” page. Only the PPPoE username and password are needed to let PPPoE work. After the “Save & Apply” button is clicked, the PPPoE function will work immediately.
| ENGLISH 5.4 Video The Video menu allows you to configure the Video settings of the EM6250HD such as Resolution, Frame rate, Day & Night, Flip image, Brightness ,Sharpness, Video Colour, Indoor or outdoor image quality, Mobile stream. 5.4.1 Video Display This page allows you to view the video display and control the Day & Night movement of the camera.
| ENGLISH 5.4.2 Video Settings The EM6250HD is designed to provide high quality video for viewing from Easy Pro View software. In this page, you can modify some settings related to the video viewing: 1. Password (play video) – this is the password needed for viewing the video from the Easy Pro View software (provided on ID/Password card). Together with the CAM ID, you can view the video of the EM6250HD anywhere in the world via the Internet.
| ENGLISH 7. 8. 9. 10. 11. 12. 13. 14. “Internet speed”, the system will need to degrade the video motion or image quality. This selection will decide if the user want to maintain the “video motion” or “image quality” when the internet speed is not good enough. Brightness – the brightness of the video, lower value means darker display. Sharpness – the sharpness of the video, higher value means sharper video. Low light sensitivity – The low light sensitivity could be normal, high or very high.
| ENGLISH 5.4.3 Mobile Video settings The EM6250HD is able to be viewed from a 3G mobile phone, please download “Easy Pro View”/”Easy Pro View HD” software from App Store for iPhone/iPad and “Easy Pro View” from Android Market for Android Mobiles and pads.. The audio, video frame rate, resolution and bandwidth for 3G mobile access could be set independently from the video settings for LAN access. The maximum allowed resolution is 1024x768 and maximum allowed bandwidth is 2mbps.
| ENGLISH 5.4.4 Night mode Control The EM6250HD is able to work both in day time and night time. There is an IR LED that can let the EM6250HD see the objects in the night. This night mode control page is to control when the time the IR LED will be on. There are three ways to control the night mode (IR LED) : 1. Automatic day and night mode switch : the EM6250HD will automatically turn on the IR LED when the night time is arrived or the environment is becoming dark.
| ENGLISH 5.5.1 E-mail/FTP alarm The EM6250HD provides the Email/ftp function, you can enable or schedule the Email/ftp ability in this page, the EM6250HD will then send out an email with a jpeg picture attached in the email and/or send out the jpeg picture file to a ftp server. The related settings are explained below: 1. Email/FTP trigger – choose between “motion”, “PIR”, “schedule” and “disable” A.
| ENGLISH For the email message to work, a SMTP server is required. Click the “advanced” button will display the SMTP server settings page. A default SMTP server is provided, so that the user does not need to use a specific SMTP server. But, anyway, the user could also specify his own SMTP server. 1. SMTP server – this is the SMTP server that will help to transfer the email message. This server is irrelevant to the “Email recipient” address. 2.
| ENGLISH Note: Sound sensor is only available in the App. 5.5.2 Speaker Alarm The EM6250HD provides speaker alarm function, a PIR or video motion detection could trigger the speaker alarm. The duration of the alarm could also be set. The related settings are explained below: 1. Speaker alarm trigger– select the trigger mode of the speaker alarm A. Motion trigger – if this is selected, the speaker alarm signal will be active when video motion is detected.
| ENGLISH 5.5.3 NAS settings The EM6250HD provides the recording of the video files into a standard NAS ( Network Access Storage ) device. The EM6250HD connects to the NAS device using the standard LMX_NS/CIFS/SSN protocols that are the same as the Microsoft Windows network neighbourhood protocols. This makes the EM6250HD easily record the video files to all the standard NAS devices in the market.
| ENGLISH 4. 5. 6. 7. 8. 9. by the “NAS name”. If the NAS device uses a fixed IP address( either in the local area network or in the public internet), the EM6250HD can connect to it by the “NAS IP address”. The “Shared folder name” is the folder in the NAS device that will record the video files of the EM6250HD. The “NAS access account” and “NAS access password” are the username and password to login into the specified “Shared folder name” of the NAS device.
| ENGLISH
| ENGLISH 5.5.4 SD-Card settings The EM6250HD provides the recording of the video files into a standard Micro SDCard. Since this recording is directly to the SD-Card, there is no network packets loss problem when recording to remote device through internet. Note : when the EM6250HD is doing SD-Card recording, this is counted as one video user. Please refer to appendix B about allowed maximum video users. 1.
| ENGLISH 5.5.5 Scheduling The EM6250HD provides the scheduling function for the motion detection triggered email/ftp sending and/or the NAS recording with the individual parameters set in the . “Email/ftp alarm” settings and the “NAS settings” page. Totally 12 schedule list items are allowed. There is no conflict check for the scheduling, it means that the scheduling time could be overlapped, and the EM6250HD will do all the scheduled events during the overlapped time period.
| ENGLISH alarm is detected. There is a five seconds pre-recording (only available when SDCard is installed) of the triggered recording to keep the critical moment recorded. 5. SD-Card Record – for each scheduling, if this is selected, either “Continuous” or “Motion triggered” or “PIR triggered” could be enabled. For “Continuous”, it means that the EM6250HD will do the video recording to the SD-Card during the whole scheduled period.
| ENGLISH password. If the login account is forgotten, you can reset the EM6250HD to the factory default settings by following the steps in section 5.6.6 and login with the “admin” account. Please be noticed that this account is different from the video play password in the “Video settings” page. 5.6.2 LED Display Control The EM6250HD provides the Led Display Control function, you can enable or disable the led display/indication on the front panel of the EM6250HD.
| ENGLISH 5.6.3 Date/Time The EM6250HD can synchronize the date/time with the universally available time server (for example time.windows.com) through NTP protocol. The date/time will then be corrected with the time server anytime when the Internet is connected. Users can choose the different Time Zone of their areas to display the correct time. For some Time Zone areas, the “Daylight Saving Time” could be enabled or disabled.
| ENGLISH 5.6.4 Upgrade If there is a new firmware available for the EM6250HD, you can upgrade the firmware on this page. A status message about the percentage done in the upgrade procedure is displayed. Please note: do not power off the EM6250HD during the upgrade procedure. After the upgrade procedure is finished, the system will restart automatically. For more information about firmware upgrade please see the manual enclosed with the firmware.
| ENGLISH 5.6.5 Reboot You can restart the EM6250HD manually on this page. All the connected video viewing users will be disconnected.
| ENGLISH 5.6.6 Set to factory default For some reason, for example you forgot the web login password, you may want to set the EM6250HD to the factory default settings. The only thing you need to do is using a stick to press the “reset” button on the back of the EM6250HD body for more than 4 seconds and release it, do this when the EM6250HD is powered on. The EM6250HD will reset to the factory default settings and restart automatically.
| ENGLISH 6.0 Frequently Asked Questions and other related information The latest Frequently asked questions for your product can be found on the support page of your product. Eminent will update these pages frequently to assure you have the most recent information. Visit www.eminent-online.com for more information about your product. 7.0 Service and support This user’s manual has been carefully written by Eminent’s technical experts.
| ENGLISH 8.0 Warning and points of attention Due to laws, directives and regulations set out by the European parliament, some (wireless) devices could be subject to limitations concerning its use in certain European member states. In certain European member states the use of such devices could be prohibited. Contact your (local) government for more information about this limitations. Always follow up the instructions in the manual*, especially where it concerns devices which need to be assembled.
| ENGLISH 9.0 Warranty conditions The five-year Eminent warranty applies to all Eminent products, unless mentioned otherwise before or during the moment of purchase. After buying a second-hand Eminent product the remaining period of warranty is measured from the moment of purchase by the product’s initial owner. Eminent warranty applies to all Eminent products and parts, indissolubly connected or mounted to the product it concerns.
| ENGLISH 10.0 Declaration of Conformity Application of Council Directives: Manufacturer’s Name: Eminent Type of Equipment: IP Camera Equipment Class: Commercial, Light Industrial, Consumer PRODUCTNUMBER: EM6250HD Easy Pro View IP HD Camera Conforms to the following standards: EN300328 V1.7.1 (2006-10) EN301489-1 V1.9.2 (2011-09) EN301489-17 V2.2.
