Install guide

ENGLISH

“Internet speed”, the system will need to degrade the video motion or image

quality. This selection will decide if the user want to maintain the “video motion” or

“image quality” when the internet speed is not good enough.

7. Brightness – the brightness of the video, lower value means darker display.

8. Sharpness – the sharpness of the video, higher value means sharper video.

9. Low light sensitivity – The low light sensitivity could be normal, high or very high.

When the low light sensitivity is high, the system could see better video clearance

under low light situation, but the moving object will not be very clear under this low

light environment. Under very dark environment, set to “very high” will get better

video clearance. The default value of this setting is “high”.

10. Video color – choose between “colored” and “black & white”.

11. Video flip – can do “normal” or “flip” video display, this is needed if the EM6250HD

is installed on the ceiling or wall.

12. Outdoor/Indoor video – for better video display quality, modify this setting when

taking indoor or outdoor video. The default setting is “Outdoor video”, in most

cases, this is also ok for indoor usage. Under some special cases, there could be

some lines on the video display when the EM6250HD is taking indoor video. In

this situation, change the setting to “Indoor video” will solve the problem. Please

also be noticed that in “Indoor video” setting, the video display of outdoor view is

very vague. For indoor usage, if there is strong sun light into the room, please

select the “indoor+sun light” choice. (Some light sources interfere the video quality

to change the frequency of the recordings you need to select indoor video or

indoor+sunlight to change the value to 60Hz or 50Hz.

13. Enable/disable audio microphone – you can enable or disable the audio

microphone on the EM6250HD. If disable, there will be no voice on the Easy Pro

View video viewing.

14. Enable/disable time display on video – if enabled, the date/time of the system will

be displayed on the left-upper corner of the video.

When this modification is saved, it works immediately, but all the connected video

viewing users will be disconnected.