Install guide

64 | ENGLISH
5.4.4 Night mode Control
The EM6250HD is able to work both in day time and night time. There is an IR LED
that can let the EM6250HD see the objects in the night. This night mode control page
is to control when the time the IR LED will be on. There are three ways to control the
night mode (IR LED) :
1. Automatic day and night mode switch : the EM6250HD will automatically turn on
the IR LED when the night time is arrived or the environment is becoming dark.
There is a light sensor on the EM6250HD that is doing this light detection.
2. Scheduled time of night mode : the EM6250HD can also be scheduled to turn on
the IR LED in a time range of each day.
3. Manual night mode control : the EM6250HD can be manually forced to night
mode( IR LED on ) or day mode( IR LED off ).
In order to get better video colour display during day time and night time, there are two
video sensors and two lenses on the EM6250HD for day and night separately. This
make sure the video colour quality is excellent compared to other IP camera’s.
5.5 Schedule
The Schedule menu allows you to configure and manage when and how the alarm
notifications are triggered. You can configure the way of notification: Email/FTP,
Speaker, Push notification. You can also configure where the video images are
recorded: NAS, Micro SD-card, FTP server. Also you can set which sensor triggers
what type of alarm or recording.