Manualshelf

Operation Manual

ManualsBrandsEminent ManualsRemote ControlsEM6511
1234567
3 |
NEDERLANDS
• USB cable (for charging the battery)
• Manual.
2.0 Using the remote control
In just a few short and simple steps, you can connect and assign the EM6511 remote
control to the e-Centre and enjoy the features of the EM6511. Use the following
procedure to connect the remote control.
The remote control feature is only available in software version 1.2.4 or higher of the
e-Centre. Please update your e-Centre to the latest software version:
1. Open your computer’s web browser
2. Fill in ‘http://e-Centre’ in the address bar of your web browser and press the
‘Enter’ key on your keyboard.
3. The openings screen of the Eminent e-Centre will be shown.
4. Click ‘Settings’ at the bottom of the screen.
5. Click the ‘Check’ button to check for the latest software.
6. If there is a newer software version, click ‘OK’ and wait 5 minutes till the new
software has been installed on your e-Centre.
2.1 Adding the remote control to the Eminent e-Centre
There are two situations possible when adding the remote control to the Eminent e-
Centre.
1. You assign the remote control to the Eminent e-Centre during the installation
process of the e-Centre itself. The installation wizard of the e-Centre will move
along the steps during the installation process of the e-Centre itself, meaning you
can add all your e-Domotica devices through the e-Centre’s own website ‘http://e-
Centre’. For this installation you have to follow the steps shown on screen.
Slide the cover open of the remote control and use the ‘Learn’ button at the right
bottom side to add the remote control to the e-Centre.
2. You can add your remote control to the already installed e-Centre. This is
described in the next paragraph.
2.2 Adding the remote control to the already installed e-
Centre
1. Open your computer’s web browser.
2. Fill in “http://e-Centre” in the address bar of your web browser and press the
‘Enter’ key on your keyboard.
3. The openings screen of the Eminent e-Centre will be shown.
4. Click the ‘Add’ button. The e-Centre will start to search for new e-Domotica
devices.