EM65X0 - e-Domotica switch
| ENGLISH EM65X0 - e-Domotica switch Warnings and points of attention Due to laws, directives and regulations set out by the European Parliament, this device could be subject to limitations concerning its use in certain European member states. In certain European member states the use of this product could be prohibited. More information regarding this warning can be found in the Declaration of Conformity on the last page of this document! Table of contents 1.0 Introduction .............................
| ENGLISH 1.2 Packing contents The following parts need to be present: • • EM65X0 wireless switch User manual 2.0 Using the switch Only a few short and simple steps are necessary in order to connect and assign the EM65X0 to the e-Centre and let the functioning of the EM65X0 begin. Use the following procedure to connect the switch. 2.1 Connecting to a wall outlet 1. 2. 3. 4. 5. Take the switch out of the packaging. Insert the switch into a wall outlet.
| ENGLISH 4. 5. 6. 7. 8. Fill in “http://e-Centre” in the address bar of your web browser and press the ‘Enter’ key on your keyboard. The openings screen of the Eminent e-Centre will be shown. Click the ‘Add’ button. The e-Centre will start to search for new e-Domotica devices. Press the button on your new switch. A message will appear: ‘Product found’. If the device is not found, press the ‘Reset’ button in the e-Centre’s webpage and then click the button on your switch.
| ENGLISH A: The switch can handle devices with the following specifications: A maximum load of 2990 Watts, lighting bulp with a maximum load of 1500 Watts, energy saving lamps and fluorescent lamps with a maximum load of 15x40 Watts. Q: A: The manual mentions ‘standby consumption’. What exactly does this mean? Devices are regularly set to the ‘Standby’ mode the moment these devices are not in use. This ‘Standby’ mode always consumes electrical power.
Warranty conditions The five-year Eminent warranty applies to all Eminent products unless mentioned otherwise before or during the moment of purchase. When having bought a secondhand Eminent product the remaining period of warranty is measured from the moment of purchase by the product’s first owner. The Eminent warranty applies to all Eminent products and parts inextricably connected to and/or mounted on the main product.
