EM6556 e-Domotica Mini Switch
| ENGLISH EM6556 e-Domotica Mini Switch Table of contents 1.0 Introduction ...........................................................................................................2 1.1 Functions and features ......................................................................................2 1.2 Packing contents ...............................................................................................2 2.0 Using the mini switch...................................................................
| ENGLISH • • EM6556 e-Domotica Mini Switch Manual 2.0 Using the mini switch In the following figure you can see one of the most common situations to use an EM6556 Mini Switch in combination with the EM6514 Wall Switch Sensor. By using the EM6514 Wall Switch Sensor (sold separately, not included) you are able to use your existing wall switch to activate a scene at your own desire. Figure 1, EM6514 Wall Switch Sensor EM6556 Mini Switch 2.
| ENGLISH 3.0 Installing the mini switch 3.1 Installing the mini switch into a junction box Warning! If you do not have enough electrical skills, do not continue and let a certified electrician do the job for you. Otherwise you might get injured and/or electrocuted. If you do have the skills, be very careful. Take notice of the following • Disable the mains of your house by turning of the main switch, before you continue. Otherwise you might get injured and/or electrocuted.
| ENGLISH 6. Connect the switching wire of the lamp with the LS input of the mini switch. Often this wire has a black color. 7. Connect the 230v live wire of the mains with the L input of the mini switch. Often this wire has a brown color. 8. Make sure all wires are fully inserted into the mini switch. 9. Turn on the main switch to enable the mains again. 10. Test whether the device works by pressing the button on the switch. (be careful and avoid touching the wires). The LED on the switch will be lit.
| ENGLISH 8. 9. Give the connected and found device a name, choose a location and click ‘Save’. The switch has now been added to the e-Centre. The e-Centre will now be able to control the switch. 10. You can now put the mini switch in the junction box. We suggest to disable the mains by turning off the main switch of the house when putting the mini switch in the junction box. 4.0 Removing the mini switch In some cases it might be necessary to remove (exclude) the mini switch from your eCentre.
| ENGLISH Q: A: What kind of LED indications does the EM6556 have? The EM6556 is not included to a system, out of the box. The LED will flash on and off at 2 second intervals. Once the EM6556 is included to a system: the LED will be off when the EM6556 is turned off and lit when the EM6556 is turned on, by pressing on the button. When a overload state occurs and the module is ON, the LED will flash on and off at 0.5 second intervals. The on/off button is disabled in this state.
| ENGLISH * Rates mentioned in this table do not include cell phone charges. 7.0 Warning and points of attention Due to laws, directives and regulations set out by the European parliament, some (wireless) devices could be subject to limitations concerning its use in certain European member states. In certain European member states the use of such devices could be prohibited. Contact your (local) government for more information about this limitations.
| ENGLISH 9.0 Declaration of Conformity To ensure your safety and compliance of the product with the directives and laws created by the European Commission you can obtain a copy of the Declaration of Conformity concerning your product by sending an e-mail message to: info@eminentonline.com. You can also send a letter to: Eminent Computer Supplies P.O.