manual

9 | ENGLISH
11. Put the Built-In switch into the ceiling junction box if possible. It is recommended
to disable the mains by turning off the main switch of the house when putting the
Built-In switch in the junction box.
Note that if the EM6557 does not fit into the ceiling junction box, you could also
mount/lay it inside the light luminary.
3.3 Optimise Z-wave network
It is recommended to optimise the Z-wave network now that you have included a new
230V powered device. Go back to the e-Centre webpage using a browser on your
computer. Go to the e-Domotica Products page and click on the ‘Optimise’ button. The
e-Centre will now check all wireless connections to 230V powered devices and update
this if necessary. This might take a few minutes.
4.0 Program your e-Centre to use the EM6557
Now that the EM6557 is included to your e-Centre, you can use it in several ways:
• Add it to one or more scenes
• To switch on when an (smoke) alarm occurs;
4.1 Add the EM6557 to an existing scene
1. Go back to the e-Centre webpage as explained earlier.
2. Click ‘Scenes’.
3. Select the scene you want to edit, for example ‘All on’. Click on the ‘Edit’
button.
4. Click ‘Add’ to add a new device to this scene.
5. Select the EM6557 from the list of devices.
6. The ‘Feature’ option will show ‘Switch’ as the only option.
7. Select ‘Assign to’ from the ‘Action’ list.
8. Select ‘On’ from the ‘Value’ list.
9. Click ‘Save’ to save these setting. You will return automatically to the scene edit
page.
10. Click ‘Save’ to save the changes made to this scene. You will return
automatically to the Scenes page.
You can follow the same instructions to different scenes. For example:
• ‘All off’, in this case select ‘Off’ from the ‘Value’ list.
• ‘Invert’, in this case select ‘Invert’ from the ‘Action’ list.
Hint: If you use a smart phone or tablet to control your house as well, you can also
switch the EM6557 using one of the scenes or stand alone using Mweb. Learn more
about this in the manual of the e-Centre 2.