Operation Manual

11 | ENGLISH
Image 9
Note: If the ‘HTTP Port’ is changed, it means this port needs to be forwarded to be
able to access the camera externally. In chapter 5.1 you need to forward the changed
port number instead of port ‘80’.
3.0 Setting up a wireless connection
Note: Make sure you have all the necessary data at hand such as your wireless
network name (SSID) and the wireless security key before you start with the wireless
connection!
Note: In order to be able to connect the camera wirelessly, you need to make sure the
camera is connected to your network using the wired connection.
Before the camera can be connected wirelessly, the antenna needs to be connected
to the camera:
EM6564 camera: Hold the antenna with 2 fingers and turn the six-sided nut clockwise.
In order to lock the six-side nut, you may use a wrench (number 8).
EM6561 camera: Turn the antenna clockwise.
The camera can be connected wirelessly using two manners:
• Manner 1: Making a wireless connection manually.
• Manner 2: Making a wireless connection using the ‘Wireless Wizard Setup’.
Both manners will be explained in the following chapter: