Operation Manual

13 | ENGLISH
7. Place a mark at ‘Using Wireless LAN Settings’
8. Click ‘Scan’ after which the camera will search for wireless networks within reach.
9. If correct, the SSID of your own wireless network will appear at the ‘Wireless
Network List’ (Sometimes, you need to scan for the second time to see SSID’s)
as shown in the following image:
Image 12
10. Click the correct SSID.
11. If your network has been secured, the correct security type will automatically be
shown. If this is not the case, you need to select the correct security type from
the list.
12. You need to fill out the network security key at ‘KEY 1,2,3 or 4’ in case you are
using WEP security as shown in the following image: