Operation Manual

18 | ENGLISH
Image 20
23. Double-click the name and IP-Address rule to wirelessly login to the webpage of
the camera.
Note: When opening the software, Windows may note the program only works if you
let the Windows Firewall unblock the program. You need to choose ‘Unblock’.
4.0 Mounting the camera to the wall or ceiling
Once the camera has been configured (wired or wirelessly), the camera can be
mounted on the desired location.
1. Make sure the cables are unplugged from the camera.
2. Use the mounting stand to mark the holes at the location where you want to
mount the camera.
3. Drill the holes and fill the holes with the supplied plugs.
4. Mount the mounting stand to the wall or ceiling using the supplied screws. If the
mounting stand is still attached to the camera, you can twist off the mounting
stand again, in order to make mounting the screws easier.
5. Mount the camera on the mounting stand.
6. Connect the network cable to the LAN connection of the camera (if needed).
7. Connect the power cable to the camera (EM6561) or connect the power tip to the
power cable of the camera (EM6564).
8. Connect the power supply to a wall outlet.