Operation Manual

19 | ENGLISH
5.0 Accessing the camera
5.1 Making the camera visible from the internet for a
computer or mobile phone
Before you can view the images of the camera using the internet, you need to open
port 80 in your router and forward this port to the IP address of your camera. In the
example below, we explain how you can configure your
EM4570/EM4542/EM4551/EM4553 router. During the following chapter, we are using
the EM4570 Wireless N-router.
Note: If you are using another type or brand of router, you need to refer to the manual
of your router for more information about opening Ports.
1. Double click the ‘IP Camera Tool’ shortcut placed on your desktop.
2. The program will automatically search for your camera in your network. When
found, the camera will be displayed in the list, as shown in the following image:
Image 21
3. Write down the IP Address of your camera. (For example: 192.168.8.54).
4. Close the program.
5. Now open the webpage of your router by opening your web browser and filling
out the router’s IP Address in the address bar, in this case: http://192.168.8.1.
6. Login using the router’s username and password. The EM4570’s default
username and password are:
• Username: admin
• Password: admin
7. The main page of the router will be shown, as shown in the following image: