Operation Manual

21 | ENGLISH
Image 24
12. Fill out ‘Camera’ in the ‘Rule Name’ field.
13. Fill out the camera’s IP-Address in the LAN IP address’ field, for example:
‘192.168.8.54’.
14. Select the ‘TCP’ option at ‘Protocol’.
15. Fill out ‘80’ at both ‘External Ports’ fields.
(If port 80 is already in use, you can also use another port, for example: 8080.
But you need to change this port also in your camera then).
16. Fill out ‘80’ at both ‘Internal Ports’ fields, unless you have changed this port in the
camera itself. (at the ‘LAN’ page). If correct, you have filled out the settings as
shown in the following screen: