Operation Manual
26 | ENGLISH
3. Install this application.
4. Start the application ‘IP Cam Viewer Lite’.
5. It is possible a list will be shown with the changes in this IP Cam Viewer Lite
version.
6. Press the ‘+’ button (add camera).
7. Select the camera type, in this case ‘IP Camera, DVR, NVR’.
8. Fill out a name for the camera. For Example: ‘Camera 1’.
9. Select the make (brand). Choose ‘Eminent’.
10. Select the camera model. Choose ‘EM6564’.
11. Fill out the local IP-Address of the camera at ‘Hostname or IP’ when you want to
connect to the camera using the local network. Fill out the internet IP-Address if
you want to connect to the camera externally.
12. Fill out the HTTP port. In this case, port ‘80’ needs to filled out (unless you have
changed this port number. In that case you need to fill out the changed port
number).
13. Fill out the username and password of the camera.
14. Click ‘Test’ to test the connection.
15. If the test is successful, you need to click ‘Save’.
16. If the IP Cam Viewer software is started again, the camera can be accessed.
Hint: The IP Cam Viewer version we have been using is version 4.4.6.3. Only the
EM6564 is selectable from the list of camera models. However, the EM6564 type can
also be chosen for the EM6561 with PTZ functions.
5.8 Accessing the camera using the internet or local
network using a smartphone with Windows Mobile 7 and
up
In the following example, we are using a Nokia Lumia smart phone with Windows 7.5
(Mango) as operating system.
5.8.1 Using the IP CAM Controller software
1. Go to ‘http://www.wpmangoapps.com’.
2. Search for the ‘IP CAM Controller’ app.
3. Install this application.
4. Start the application’.
5. Press the ‘new camera’ button’.
6. Fill out a name for the camera. For Example: ‘Camera 1‘.
7. Fill out the IP-Address of the camera.
8. If the brand or type is asked, you can select ‘Eminent’. If Eminent is not present,
you can choose ‘Foscam’.
9. Fill out the correct ‘HTTP’ port. In this case, port ‘80’ needs to filled out (unless
you have changed this port number. In that case you need to fill out the changed
port number).
10. Fill out the username and password of the camera.