Operation Manual

27 | ENGLISH
11. Press the ‘Save’ button to save these settings.
12. If the IP Cam Controller software is started again, the camera can be accessed.
5.9 Accessing the camera using the internet or local
network using a mobile phone with Symbian
In the following example, we are using a Nokia N97 mini. Other phones with the
Symbian Operating system might have slightly different steps.
5.9.1 Installation of ‘IP Camera Player’
1. Click on the menu button.
2. Open the webbrowser.
3. Click on 'options'.
4. Click 'Go to'.
5. Click 'New web page'.
6. Fill out: http://www.eminent-online.com/EM6564/ipcam.jar and click on the enter-
key.
7. The following notification appears: 'Install IP Camera Player’.
8. Click ‘OK’.
9. The telephone might give a security warning. Click 'Continue'.
10. Select the location/drive where the files can be stored.
We suggest to choose 'C: Phone mem.'
11. Click 'Select'.
12. The notification 'Installation complete' appears.
13. Click 'Close'.
5.9.2 Starting the ‘IP Camera Player’
1. Click the menu button.
2. Click 'Applications'.
3. Select the application 'IP Camera Player' and click the 'enter' button.
4. You can leave the ‘Alias’ field empty.
5. Fill out the IP-Address of the camera in the field ‘Camera Hostname/IP’
(normally without the text ‘http://’).
6. Fill out the port of the camera in the field ‘Port’. Often port 80 is used, sometimes
port 81 or 8080.
7. Fill out the username ‘admin’ in the field ‘User’.
8. Fill out the password ‘admin’ in the field ‘Password’.
9. Click 'Options'.
10. Click 'OK'.
11. If the telephone show the notification: 'Allow application to use network?' then
click 'Allow for this session'.
12. The telephone will notify after a few seconds: 'Connecting to camera...'
13. The image of the camera will be shown.