Operation Manual

29 | ENGLISH
Note: DynDNS has previously been a free service. However, at this moment DynDNS
is a paid service.
Note: In order to be able to use www.no-ip.com in the camera, the camera needs to
have the latest firmware installed. Check www.eminent-online.com if the latest
firmware is already installed in your camera.
Use the following settings to setup the camera:
1. Double-click the ‘IP Camera Tool’ icon which is located on your desktop.
2. If correct, the name of the camera and IP-Address will be shown, as shown in
the following image:
Image 27
3. Double-click the name and IP-Address rule.
4. A username and password will be asked. The default* username and password
are:
• Username: admin (*If you have changed the username/password you need
to use the changed username/password)
• Password: admin (*If you have changed the username/password you need to
use the changed username/password)
5. Click ‘Login’.
6. Click ‘For Administrator’
7. Click ‘DDNS Service Settings’ after which the following image will appear: