Operation Manual

35 | ENGLISH
8. At ‘Sender’, fill out your own e-mail address.
9. At ‘Receiver’, fill out the e-mail address of the recipient(s).
10. At ‘SMTP Server’, you need to fill out the server settings of the ‘outgoing mail
server’.
11. If your e-mail account requires authentication, place a mark at ‘Authentication’
and fill out the username and password of your e-mail account.
12. If correct, the screen will be filled out as shown in the following example. Please
note: The image is purely an example:
Image 36
13. If an ‘event’ takes place, (Motion detection or alarm notification) an e-mail will be
send to the recipients (receivers).
14. Click ‘Submit’ to save these settings.
7.1.2 FTP Service Settings
1. Click ‘FTP Service Settings’ after which the following image appears: