Operation Manual

37 | ENGLISH
5. Click ‘Submit’ to save these settings.
7.1.3 Alarm Service Settings
1. Click ‘Alarm Service Settings’, after which the following image appears:
Image 39
2. Place a mark at ‘Motion Detect Armed’.
3. Select the sensitivity of the motion detection. ‘1’ is the lowest setting and is the
least sensitive, ‘10’ is the highest setting and is the most sensitive.
4. Since the E-mail and FTP services are already set, you can place a mark at
‘Send Mail on Alarm’ and at ‘Upload Image on Alarm’.
5. Select the upload interval. If the camera is set to ’10 seconds’, it means the
camera will upload an image to your FTP server every ten seconds during an
alarm notification.
6. If you want to set a schedule, which means Motion Detection and alarm
notifications will take place at preset times, you can place a mark at ‘Scheduler’.
7. If you want to set Motion Detection and alarm notifications during the whole
week, at specific times, you can select the days and times on which the
recordings needs to take place. The blue colours represent the active hours of
Motion Detection, the white colours represent the inactive hours of Motion
Detection.
8. In the following example we have set Motion detection and alarm notifications
during the whole week, but only between 00:00 - 08:00 and between 18:00 –
22:00.