Operation Manual

39 | ENGLISH
8.0 Explanation of the webpage of the camera
In the paragraph below, we assume you logged in to the camera using Internet
Explorer.
The menu will be slightly different when using other web browsers.
8.1 ‘Device Status’
The ‘Device status’ shows the amount of camera’s which are added to the network.
The green circle represents the active camera.
Also see the following image as reference:
Image 41
8.2 ‘For Visitor’ menu
1. If multiple camera’s are added, click the plane with four or nine squares. Each
square represents a camera image. Double-click an image to display the image
in full screen. Double-click the image again to view the image in a small screen
again. You can also select a specific camera by clicking the camera number ‘1’ to
‘9’.
2. You can enable the OSD (On Screen Display) in order the date and time are
shown on the live video stream. You can also select an OSD colour.
3. Click the button with the photo camera (‘Snapshot’) to make a snapshot or
screenshot of the current image. A new window will be shown. Click ‘Save’ to
save the photo as a file.
4. Click the camera button (‘Record’) to record video to your hard disc. Click the
‘Stop’ button if you want to stop recording. The video is stored as an AVI file.
Note: The following features are only available on the EM6561 Rotating Camera:
5. Click on the ‘headset’ button (‘audio’) to listen to audio from the camera.
6. Click on the ‘mic’ button (‘talk’) to send audio to the camera speaker. When this
option is used, a microphone needs to be connected to your computer.
Also see the following image as reference: