Operation Manual

5 | ENGLISH
2.2 Using the wired connection
It is advisable to connect the camera to your wired network first. Once the camera has
been setup correctly, you can setup the camera to be used for your wireless network.
1. Take the camera out of the packing.
2. Connect the supplied network cable to the LAN connection of the camera.
3. Connect the other side of the network cable to a free LAN port of your router or
switch.
4. Connect the power cable to the camera (EM6561) or connect the power tip to the
power cable of the camera (EM6564).
5. Connect the power supply to a wall outlet.
2.3 Using the search utility to connect and login to the
camera
The camera can be accessed using the ‘IP Camera Tool’ software you have installed.
In the following steps, we will assume Internet Explorer is being used.
1. Double-click the ‘IP Camera Tool’ icon on your desktop.
2. If correct, the name of the camera and IP-Address will be shown as shown in the
following image:
Image 1
3. Double-click the name and IP-Address rule.
4. A username and password will be asked as is shown in the following image: