Operation Manual

9 | ENGLISH
Hint: Fill out the camera’s new Username and Password below.
This way, you always have the correct information at hand!
Camera Username: ___ . ___ . ___ . ___
Camera Password: ___ . ___ . ___ . ___
Hint: At the ‘User Settings’ page, you can create multiple accounts with ‘Administrator’,
‘Operator’ or ‘User’ privileges. ‘User’ privileges only allows to login and view the
images. No settings can be changed when using ‘User’ privileges.
2.5 Setting a fixed IP-Address
In some cases it can be handy to set a fixed IP-Address. This way, you know for sure
which IP-Address is in use by the camera and the camera will always be accessible
using the same IP-Address.
1. Click ‘For Administrator’.
2. Click ‘Basic Network Settings’ after which the following image will appear:
Image 7
3. Remove the mark at ‘Obtain IP from DHCP Server’. The screen will change with
several extra field, as shown in the following image: