User manual
10 |
ENGLISH
phone with Windows Mobile, Java or Blackberry
There are 3 solutions to view video images on your mobile phone.
1. Copy the Java software ‘IPCamera.jar’ from the CD-ROM to your mobile phone and
install this application on your mobile phone.
Open your Java application and run the program ‘IP Camera Player’.
Please be noted this Java software is not supported by certain mobile phones, even if
these phones support Java.
2. You can also view a live ‘photo’ of the camera by opening the browser on your
mobile phone and adding following url as favorite link:
http://192.168.1.xxx/snapshot.cgi?user=admin&pwd=admin
In above textline, you need to replace 192.168.1.xxx by the public IP address of your
ipcamera when viewing through the internet. (or fill in the local IP address when
viewing in your local network)
This is not live video, but 1 image at a time. This image can be refreshed in your
browser by using the ‘refresh’ feature of your browser.
3. If you need more features, you can try third-party software such from:
www.mobiscope.com or www.totalcontrolapp.com. After 1 or 2 weeks, you will have to
pay for this software if you want to keep using this software.
3.10 Setting up DynDNS
Because a name can be remembered more easily and an Internet IP Address can
change, you can make a dynamic DNS name and set this name in the camera itself.
This way, you can view the camera;’s image by using the name camera.dyndns.org
for example.
Attention! If you have already set a dynamic DNS name in your wireless router, there
is no need to set this name again in the camera.
You can make an account by sing www.dyndns.org. You will then receive a dynamic
DNS name, an username and a password for your connection.
Use the following settings to setup the camera:
1. Open the wepage of the camera.
2. Click on the menu ‘For Administrator’
3. Click on ‘DDNS Service Settings’
4. Choose your Dynamic DNS provider in the ‘DDNS Service’ dropdown list.
5. Fill in the username of your dynamic DNS name at ‘DDNS User’.
6. Fill in the password of your dynamic DNS name at ‘DDNS Password’.
7. Fill in your dynamic DNS name at ‘DDNS Host’. In the ‘camera.dyndns.org’
example the host name is ‘camera’.