User manual

12 | ENGLISH
Following features are only available for the rotating camera EM6561:
5. Click on ‘headset’ button (‘audio’) to listen to audio from the camera.
6. Click on the ‘mic’ button (‘talk’) to send audio to the camera speaker.
Please be noted: The audio features of the camera are just for surveillance use,
and not for a high quality ‘phone’ conversation.
4.3 ‘For Operator’ menu
1. Click ‘Flip’ to rotate the image. This is a handy feature, in case the camera is
mounted to a ceiling.
2. Click ‘Mirror’ to display the image mirrored.
3. At ‘Resolution’, you can change the resolution of the image.
4. At ‘Mode’, you can optimize the camera for the the kind of light. You can change
the frequency to ‘Outdoor’ if the camera is looking outside.
5. At ‘Brightness’ and Contrast’, you can change the brightness and contrast of the
image.
6. For EM6561 only: Use the arrows to move the camera up/down and left/right.
4.4 ‘For Administrator’ menu
Device Info
Click ‘Device Info’ to see the current firmware version and the software version of the
web interface.
Alias Settings
1. Click ‘Alias Settings’. The name filled in behind ‘Alias’ is the camera name you
will see in the title of your browser.
2. You can alter this name if desired.
3. Click ‘Submit’ to save the data.
Data&Time Settings
1. Click ‘Date&Time settings’.
2. You will now see a date and time. At ‘Device Clock Timezone’, you can setup the
time zone.
3. Place a mark at ‘NTP Server’ to synchronise the time by using a time server on
the internet.
4. Place a mark at ‘PC Time’ to synchronise the time using the computer’s time
settings.
Users Settings
1. Click ‘User Settings’.
2. Using this menu, you can add multiple users with different passwords and
privileges.