User manual

16 | ENGLISH
Q: How does the I/O alarm connector at the back of the EM6561 rotating camera
work?
A1: The I/O alarm connector has 4 connectors:
1 Alarm output(+5V)
2 Alarm output(+5V)
3 Alarm input
4 Ground
Explanation: The input pin 3 can be used for an external sensor input. For
example, you can connect a Passive Infrared Sensor (PIR) to pin 3 and pin 4 for
motion detection. When the external sensor is triggered, the camera can be
programmed to send an email with picture or control the internal relay output.
If you link an external alarm with pin 1 and pin 4, then the external alarm will be
enabled when enable alarm input is triggered.
6.0 Service and support
This users manual has been carefully written by Eminent’s technical experts.
If you have problems installing or using the product, please fill out the support form at
the website This users manual has been carefully written by Eminent’s technical
experts. If you have problems installing or using the product, please fill out the support
form at the website www.eminent-online.com/support.
You can also contact us by phone. Below you will find a list with phone numbers for
each supported country.
Country Phone number Rate per
minute*
Belgium (Dutch) 070 277 286 €0.30
Belgium (French) 070 277 286 €0.30
Denmark [phone] Local Costs
Finland [phone] Local Costs
Germany 1805 982 234 €0.14
Italy [phone] Local Costs
Norway [phone] Local Costs
Spain 807 080 042 €0.41
Sweden [phone] Local Costs
The Netherlands 0900-3646368 €0.45
UK 905 871 0013 £0.30
* Rates mentioned in this table do not include cell phone charges.