User manual

4 | ENGLISH
1. Connect the camera to a power outlet using the supplied power adapter.
2. Connect the camera to your router or switch using the supplied network cable.
2.2 Installing the software and ActiveX driver
Before you can view the video of the camera, you need to install the ActiveX software
from the CD-ROM by following the steps below:
(This software is required when viewing the video of the camera directly by using the
webpage of the camera itself, without e-Centre.)
1. Place the supplied CD-ROM in your CD-ROM or DVD-player.
2. Select the desired language.
3. Select ‘Software and ActiveX driver’ and click ‘Next’.
4. Click ‘Next’.
5. Click ‘Next’.
6. The software will ask if you want to reboot your computer. Click ‘Close’.
2.3 Adding the camera to a new Eminent e-Centre
You assign the camera to a Eminent e-Centre during the e-Centre’s initial installation
process.
1. The installation wizard of the e-Centre will move along several steps during the
installation process of the e-Centre itself, meaning you can add all your e-
Domotica devices through the e-Centre’s own website ‘http://e-Centre’.
2. At step 9, your camera will be found. Follow the steps shown on the screen.
2.4 Adding the camera to the already installed e-Centre
If you have already completed the wizard of the e-Centre earlier, you can add the
camera by following the steps below.
1. Make sure your computer is completely started.
2. Open your computer’s web browser.
3. Type in the web browser’s address bar: ’http://e-Centre’ and press the ‘Enter’ bar
on your keyboard.
4. The e-Centre’s openings screen will be shown.
5. Click ‘Camera management’.
6. Click ‘Search’.
7. Your camera will be found with the corresponding IP Address and MAC address.
8. Click ‘Assign’.
9. Give the device a name, fill in the camera’s username (‘admin’) and password
(‘admin’) and give a location to the camera. Click ‘Test’ to check whether you
have filled in the correct camera password.
10. Click ‘Save’. The camera has now been added.