User manual
5 |
ENGLISH
11. In order to view the camera’s image on the e-Centre itself, press ‘Camera’ on the
touch screen. Behind the camera’s name, press ‘View’. The camera’s image will
be shown.
If the camera has not been found, press the ‘Search’ button again. If this still does not
work, unplug the camera’s power cord and connect it again. Once the camera has
finished booting, press ‘Search’ again.
2.5 Adding the camera to a wireless network
Screw the antenna on the back of the camera as explained below.
EM6561 camera: Hold the antenna with 2 fingers and turn the six-sided nut clockwise.
EM6564 camera: Turn the antenna clockwise.
Once the camera is connected on your wired network, you can also add the camera to
your wireless network. Follow the instructions of the ‘Wizard for wireless connection’
on the supplied CD-ROM to connect your camera to your wireless network. During this
wizard, the wireless network key of your existing wireless network will be asked. Fill in
this wireless security key in order to connect to your wireless network. Make sure you
have this wireless security key before you start the wizard!
After you have followed the steps of the wizard successfully, your camera is
connected to your wireless network and the network cable can be removed.
(It is also possible to connect the camera to a wireless network by opening the
webpage of the camera, see chapter 4.1. The default username and password are
‘admin’ and ‘admin’. Click on ‘For Administrator’ and then open the menu ‘Wireless
Lan Settings’. Select the correct wireless network in the network list, fill in the correct
password and click ‘Submit’)
2.6 Mounting the camera on the wall or ceiling
1. Once the camera is connected correctly with your e-Centre or your computer,
you can mount the camera on a wall or ceiling.
2. Use the mounting stand to mark the holes at the location where you want to
mount the camera.
3. Drill the holes and fill the holes with the supplied plugs.
4. Mount the mounting stand to the wall or ceiling using the supplied screws. If the
mounting stand is still attached to the camera, you can twist of the mounting
stand again, in order to make mounting the screws easier.
5. Mount the camera on the mounting stand.
6. Connect the power supply into the wall socket and connect the power tip to the
camera.