User manual

6 | ENGLISH
2.7 Removing the camera from the e-Centre
1. Make sure your computer is completely started.
2. Open your computer’s web browser.
3. Type in your web browser’s address bar: ‘http://e-Centre’ and press ‘Enter’.
4. The Eminent e-Centre’s openings screen will be shown.
5. Click ‘Camera control’.
6. Click the ‘Remove’ button.
7. The camera has now been removed.
3.0 Viewing images
You can view the images both on your computer and on your e-Centre screen, as we
explain in the paragraphs below.
Optionally, you can install the supplied software so you can find the camera directly
with your computer and make recordings with your computer.
3.1 Through your e-Centre
Touch the camera icon on the screen of the e-Centre. The e-Centre shows live
images.
3.2 At an e-Domotica alarm indication
The e-Domotica system allows camera images to be stored in an alarm, for example,
a motion or door contact. This features is only available if you have a
(trial)subscription. You can view live camera images on internet by logging into the
online e-Domotica portal. Click on 'Recordings' and select the video you want to play.
3.3 Through the internet using the e-Domotica portal
You can view live camera images on internet by logging into the online e-Domotica
portal and click the menu ‘Cameras’. If you have an e-Domotica touchscreen, you do
not need to open a port in the router, the camera will be accessible automatically.
3.4 Making the camera visible from the internet for a
computer or mobile phone
Before you can view the video, you first need to open port 80 in your router and
forward this port to the IP address of your camera. In the example below, we explain
how you can configure your EM4551/EM4553 router. For other routers, the steps
below might be slightly different.
1. Double click the ‘IP Camera Tool’ shortcut placed on your desktop.
(This program has been installed and described in paragraph 2.2).