User manual
7 |
ENGLISH
2. The program will automatically search for your camera in your network. When
found, the camera will be displayed in the list.
Write down the IP Address of your camera. (For example: 192.168.8.100).
3. Close the program.
4. Now open the webpage of your EM4551 by opening Internet Explorer and filling
in the EM4551’s IP Address on the address bar, in this case it is:
http://192.168.8.1.
5. Login using the EM4551’s username and password. The EM4551’s default
username and password are: ‘admin’ for username, ‘admin’ for password.
6. Click ‘Setup Tool’.
7. Click ‘Advanced Setup’.
8. Click ‘NAT/Routing’.
9. Click ‘Port Forwarding’.
10. Fill in ‘Camera’ in the ‘Rule Name’ field.
11. Fill in the camera’s IP Address in the LAN IP address’ field, for example:
‘192.168.8.100’.
12. Select the ‘TCP’ option at ‘Protocol’. Fill in ‘80’ at both ‘External Ports’ fields.
(If port 80 is already in use, you can also use another port, for example: 8080.
But you need to change this port also in your camera)
13. Fill in ‘80’ at both ‘Internal Ports’ fields, unless you have changed this port in the
camera itself. (at the ‘LAN’ page).
14. Click ‘Add’, after which the new rule will be added to the list.
15. Click ‘Save’ to store the settings.
The port forwarding has now been finished. Your camera is now accessible externally
for third parties. The camera is accessible on the internet IP address or by using your
dynamic DNS name. The camera’s webpage can now be opened by typing the
following in the address bar of Internet Explorer: http://external.ip.addr.ess, (for
example: http://84.12.98.15).
If you have not set port number 80 at step 14, but another port number, you have to fill
in this port number. For example, If you have set port number 8080:
http://external.ip.addr.ess:8080 or http://camera.dyndns.org:8080.
Hint: Fill in the camera’s and internet IP Addresses below.
This way, you always have the correct information at hand!
Camera IP Address: ___ . ___ . ___ . ___
Internet IP Address: ___ . ___ . ___ . ___
3.5 Through the internet or local network using a
computer
1. Before you can view the video remotely through internet, you first need to open