User manual

5
|
ENGLISH
If the motion sensor is placed at a distance of more than 25 meters, place the motion
sensor at the desired location. Choose ‘e-Domotica products’ in the e-Centre’s
webpage, then choose the ‘Optimize’ option. By doing so, your wireless network will
be optimized for maximum range.
Note: In order to use the alarm function, we refer to the user manual of the Eminent e-
Centre.
2.5 Removing the motion sensor
1. Make sure your computer is completely started.
2. Open you computer’s web browser.
3. Fill in “http://e-Centre” in the address bar of your web browser and press the
‘Enter’ key on your keyboard.
4. The openings screen of the Eminent e-Centre will be shown.
5. Click the ‘Remove’ button.
6. Press the button on your motion sensor.
7. The device has now been deleted.
3.0 Frequently asked questions
Q: What is the maximum wireless range of my e-Domotica devices?
A: Thanks to the network’s repeating option (amplifiers), the wireless range of the e-
Domotica devices is virtually unlimited. The motion sensor acts as a repeater.
Without repeating, the maximum wireless range indoor is approximately 25
meters. You can optimize the wireless range by adding an extra EM6580 motion
sensor or EM6550 switch, and then use the ‘Optimize’ function in de e-Centre’s
webpage.
Q: What does the turning knob do which is placed at the top of the motion sensor?
A: By default, this knob is not in use . This knob only has a function when connected
directly to a switch, without using the e-Centre. The knob can be used to
determine the duration a lamp has to be lit if motion is detected).
4.0 Service and support
This users manual has been carefully written by Eminent’s technical experts.
If you have problems installing or using the product, please fill out the support form at
the website www.eminent-online.com/support.