User manual

6 | ENGLISH
4.2 Testing the Smoke detector and (periodic) test
Now the smoke detector has been installed and is mounted onto the wall bracket, you
can test the smoke detector.
Press the button on the smoke detector for a few seconds. If correct, the alarm of the
smoke detector will sound. As a periodic test, you can test the smoke detector once a
month in order to test the sound alarm. This way, you will be assured the smoke
detector works correctly.
5.0 Alarm settings using the e-Domotica
portal
The EM6590 can be setup for an alarm notification. Besides the already mentioned
scenarios, there is the possibility to get a SMS message, phone call or email
notification using the Eminent e-Domotica portal If you are not able to respond, other
persons present in your contact list will be noticed. This way, you know for sure your
house will be secured. Click the red ‘Online’ button in the bottom part of the e-Centre’s
webpage in order to login to the Eminent e-Domotica portal.
Note: In order to receive SMS and/or telephone notifications, a subscription is
required!
6.0 Frequently asked questions
Q: What does the status LED on the device mean?
A: This LED tells you the status of the device: Normally, when assigned to the
e-Centre and working correctly, the status LED will blink once every 30
seconds. If the smoke detector senses smoke, the status LED will be lit
every 0.67 second, simultaneously the audible alarm will go off.
Q: Except not to be mounted in corners, are there other locations where
installing the smoke detector is not recommended?
A; Some locations are not recommended: Near or in kitchens, bathrooms,
dusty, dirty or drafty environments, and fluorescent lights.
Q: What is the estimated lifespan of the supplied 9V battery?
A The estimated lifetime of the supplied 9V battery is one year. If the battery is
almost depleted, the smoke sensor will start to make a sound, once every
30 seconds. If the smoke sensor warns you, make sure you replace the
battery as soon as possible.