EM6630 e-Domotica Blinds Control
| ENGLISH EM6630 e-Domotica Blinds Control Table of contents 1.0 Introduction................................................................................................................. 2 1.1 Functions and features .......................................................................................... 2 1.2 Technical drawings ................................................................................................ 3 1.3 Packing contents......................................................
| ENGLISH Please observe the instructions of the motor manufacturer. 1.
| ENGLISH Figure 3 1.3 Packing contents The following parts need to be present in the packing: • EM6630 e-Domotica Blinds Control (insert) • EM6630 e-Domotica Sensor Cover (push button) • EM6630 e-Domotica 1-Gang Frame • Manual 2.0 How to install the insert Risk of fatal injury from electrical current. If you do not have enough electrical skills, do not continue and let a certified electrician do the job for you. Otherwise you might get injured and/or electrocuted.
| ENGLISH Applications other than switching the blind and roller shutter motors, e.g. controlling a rolling door, can become a cause of danger. Prevent such dangers from occurring by taking suitable additional safety measures. Observe the applicable accident prevention regulations in your area. 1. 2. 3. Wiring the insert (Figure 2). Figure 3: Install the insert A in a flush-mounting box (a deep box is recommended) in such a way that the connecting terminals are at the bottom.
| ENGLISH 4.0 Add the roller shutter button to an eDomotica e-Centre 1. 2. 3. 4. 5. 6. 7. 8. Make sure your computer is completely started. Open your computer’s web browser. Enter “http://ecentre” in the address bar of your web browser and press the ‘Enter’ key on your keyboard. The webpage of the e-Centre will be shown. If the Wizard is started, click ‘Exit Wizard’. Go to the ‘e-Domotica Products’ page. Click the ‘Include’ button. The e-Centre will start to search for new e-Domotica devices.
| ENGLISH 5.0 How to raise and lower the roller shutter Caution: danger of trapping a finger, clothes, etc. Make sure that the area in which the roller shutter is going to move is not obstructed and that no-one can get caught in it. You can operate the roller shutter by means of the following operating elements: 5.1 Locally using the sensor cover You can use the ▲ button to raise the roller shutter and the ▼ button to lower it. 5.
| ENGLISH By default the ‘Open’ button is displayed on screen. Open Press the button once to close the blinds, icon ‘Closing’ will appear afterwards, blinds go down. Closing To your desire, press the button again to stop, icon ‘Closed’ will appear. Closed Press the button once to open, icon ‘Opening’ will appear, blinds go up Opening To your desire, press the button again to stop, icon ‘Open’ will appear. Open 5.
| ENGLISH Make sure that the roller shutter push button is properly attached to the insert. The roller shutter cannot be operated using the transmitter button • Make sure that the maximum range is not exceeded and that there are no metal surfaces such as metal cabinets or similar in the radio transmission path. • Check that the battery is placed correctly in the push button and that it is not flat. 7.
| ENGLISH Belgium (French) Denmark Finland Germany Italy Norway Spain Sweden The Netherlands UK 070 277 286 +45 69918565 +35 8942415826 +49 (0)30 887 89 298 +39 0240042016 +47 21075033 807 080 042 +46 840 309985 0900-3646368 +44 (0)203 318 9998 €0.30 Local costs Local costs Local costs Local costs Local costs €0.41 Local costs €0.45 Local costs * Rates mentioned in this table do not include cell phone charges. 10.
| ENGLISH 11.0 Warranty conditions The five-year Eminent warranty applies to all Eminent e-Domotica products unless mentioned otherwise before or during the moment of purchase. When having bought a secondhand Eminent e-Domotica product the remaining period of warranty is measured from the moment of purchase by the product’s first owner. The Eminent warranty applies to all Eminent e-Domotica products and parts inextricably connected to and/or mounted on the main product.
| ENGLISH 12.0 Declaration of Conformity To ensure your safety and compliance of the product with the directives and laws created by the European Commission you can obtain a copy of the Declaration of Conformity concerning your product by sending an e-mail message to: info@eminentonline.com. You can also send a letter to: Eminent Computer Supplies P.O.