User manual
19 | ENGLISH
13. At ‘LAN IP Address’ you have to fill in the media player’s IP-address.
14. Select ‘TCP’ at ‘Protocol’.
15. Fill in ‘6881~6881’ at ‘External Port’.
16. Fill in ‘6881~6881’ at ‘Internal Port’.
17. Click ‘Add’. If correct, the new rule will displayed at the lower part of the screen.
18. Make sure the name of the rule is marked, and click ‘Run’ to activate this rule.
Your router has now been configured for using the Bit torrent module.
12.2 Using the Bit torrent module
1. Fill in the media player’s IP-address on the address bar. For example:
http://IPAddress and press the ‘Enter’ key on your keyboard.
2. The bit torrent module will automatically be shown on screen.
3. Wait until the screen is completely loaded.
4. Click ‘Bittorrent download’.
5. Click ‘+ Add new torrent’.
6. Click ’Browse’ and then browse to the torrent file you want to upload to the media
player.
7. Double-click the torrent file. Click ‘Yes’.
8. You will now see the name of the torrent file in the menu of the torrent module.
9. Place a mark at the torrent and click ‘Start’ to start downloading.
Hint: The downloaded files can be found using: \\IPaddress (also see ‘Samba server’)
1. In the folder ‘BT’ you can find the file you have downloaded.
2. If a tr~ mark is shown at the name of the file, it means the file has not yet been
downloaded completely.
13.0 The NZB module of the EM7080
The EM7080 has a built-in Usenet module, called the ‘NZBget’ module. Using this
module, you can download all sorts of media to the hard disk of the media player. The
EM7080 will automatically repair the files (if necessary) and will automatically unpack
the files. As soon as these procedures have been completed, you can playback this
media on your television.
Using the following steps, we will explain how to setup the NZBget module.
13.1 Setting up the NZBget module
1. Make sure you know your media player’s IP-address. You find this IP-address
using the media player’s menu.
2. Open the computer’s web browser.
3. Fill in the IP-address on the web bworser’s address bar, followed by :8080. For
example:
http://IPaddress:8080
4. Click ‘config’ at the left side of the menu.