User manual

7 | ENGLISH
5.2 Connecting the media player using component
(Y/Pb/Pr)
If your television is not equipped with an HDMI connection, or your HDMI connections
are already occupied, you can connect the EM7080 using component. Using
component, you can also use HD resolutions.
1. Connect the red plug to the red component connection on the EM7080.
2. Connect the blue plug to the blue component connection on the EM7080.
3. Connect the green plug to the green component connection on the EM7080.
Afterwards, connect the red, blue and green plugs on the other side of the
component cable to the corresponding component input connections on your
television set.
Note! The red component cinch is not an audio output cable!
5.3 Connecting to your television using composite
If your television is not equipped with an HDMI connection or component connections,
you can use the composite connection on the hdMEDIA RT. Connect the yellow plug
to the yellow cinch connection on the EM7080.
Now you can connect the yellow plug on the other side of the cable to the yellow cinch
connection on your television.
5.4 Audio Connections
There are different ways to enjoy the sound the EM7080 produces. You can connect
the red and white plugs of the ‘composite’ cable to your television or receiver to create
a ‘2.0’ stereo effect. If your television has HDMI audio support, you can make use of
the HDMI cable order to receive both image and digital sound on your television, in
stereo only.
If you use a (certified) DTS receiver, then you can enjoy true digital sound by
connecting the player over HDMI 1.3 to a digital input on your receiver.
You can also use the media player’s SPDIF output. If your receiver is equipped with a
optical (TOSLINK) input, then you can enjoy the media player’s digital sound during
movie and music play.
1. Connect the optical cable to the optical output of the media player.
2. Connect the other side of the optical cable to the corresponding input of your
receiver.
Note: Because of bandwidth requirements, the TOSLINK optical output cannot be
used to transport the raw DTS-HD signal. You will require a HDMI 1.3 digital receiver