User manual

5 | ENGLISH
4.4 Toslink (SPDIF)
If you have a digital receiver with a Toslink (SPDIF) connection, you can enjoy the
media player’s digital sound during movie and music play. Simply connect the Toslink
cable to the Toslink connection on your digital receiver and on the ‘Optical’ connection
of the media player.
5.0 Setting up the media player
When all necessary cables are connected, it is time to turn the media player on and
make the settings you need.
5.1 Formatting the hard disk
1. Select ‘Setup’ and press the ‘OK’ button.
2. Select ‘System’ and press the ‘OK’ button.
3. Select ‘Format’ and press the ‘OK’ button.
4. Use the steps shown on screen.
5. After formatting, the EM7167 will ask a confirmation. Press the ‘OK’ button after
which the EM7167 will restart.
Note: Please be patient when formatting. This procedure must not be interrupted!
5.2 Image settings
1. Set the television to the correct HDMI or AV channel.
2. Connect the supplied power supply to a wall outlet.
3. Connect the other side of the power supply to the ‘DC IN 12V’ connection of the
media player.
4. If the media player does not start automatically, you need to press the ‘Power’
button at the front of the media player.
5. You will see a boot screen. After the boot screen, the media player shows a
‘Menu Language’ screen. Press the ‘OK’ button on the remote control.
6. Select ‘English’ and press the ‘OK’ button.
7. Now select ‘Setup’ and press the ‘OK’ button.
8. Select ‘TV System’ and press the ‘OK’ button.
9. Select the desired resolution (HDMI only) and press the ‘OK’ button. If you have
a Full HD television, the recommended setting should be ‘1080P 60Hz’.
10. You will see a warning which you need to confirm. After confirmation the media
player will ask you to apply the chosen settings immediately. Select ‘yes’ and
press the ‘OK’ button. The media player will change to the chosen resolution.
11. Press the ‘Home’ button to return to the main menu.
5.3 Audio settings
The EM7167 has some advanced audio features. Use the following steps to view and
alter the current audio settings.