Operation Manual

8 | ENGLISH
Hint: If the wizard does not appear after the first startup, you need to set the media
player back to default settings. After this procedure, the wizard will appear. Using
‘Setup  System  Factory default’ the media player will be set back to factory default.
7.0 Manual Settings
After using the wizard, the initial settings have been set. Now, you can completely set
the media player to your own preferences.
7.1 Formatting the hard drive
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button after which
the ‘System menu’ is selected by default.
2. Go to ‘Format’ and press the ‘OK’ button.
3. Select ‘Internal HDD’ and press the ‘OK’ button.
4. Use the steps shown on screen.
Hint: If your are planning to use the ‘Time Shift’ option, select the amount of free disk
space you think you will need. ‘1 Hour=4Gb’ is selected by default, ‘4 Hour’ is the
maximum amount you can set.
7.2 Setting up the screen
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Video’.
3. Select the correct aspect ratio. When using a wide screen television, ‘16:9’ is
recommended.
4. Select the desired resolution at ‘TV System’. When using a Full HD television,
1080P 60Hz is recommended. This resolution provides the best possible image
quality.
5. ‘Video Zoom’ can be used to zoom in when playing video material. Only usable
on full screen! Default setting is set to ‘Off’.
6. If video content will be used with ‘original’ HD video specifications such as video
with 24 frames per second, you can also set 1080P 24Hz to ‘On’. This way, the
video content with original video specification will be shown as fluently as
possible.
7. If necessary, the ‘Deep color’ option can be set. The amount of bits will determine
the amount of colors shown on screen. The higher amount of bits = More colors.
Usually, ‘Auto’ is the ideal setting. Only change this option to a manual setting if
you do know what the maximum amount of bits is for your television.
7.3 Setting up sound
7.3.1 If connected directly to your television:
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Audio’.
Downloaded from www.Manualslib.com manuals search engine