Installation guide
15
|
ENGLISH
7.4 Setting up the network
During the wizard, the initial network setup was available. The network settings can be
changed afterwards if necessary. The EM7385 also has a built-in WIFI module, which
allows you to easily setup the wireless connection. The EM7380 can also connect to
your wireless network by connecting an EM4576/4579 wireless USB stick. During the
next chapter we will explain how wired network settings can be changed and how to
setup a wireless connection.
7.4.1 Wired connection - Automatically using DHCP
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Network’.
3. Select ‘Wired Lan Setup’ and press the ‘OK’ button.
4. Choose ‘DHCP IP (AUTO)’ to automatically obtain an IP-Address. Press the ‘OK’
button to confirm.
5. Choose ‘DNS (auto)’ and press the ‘OK’ button, after which the notification ‘Save
network setting appears’. Select ‘Yes’ and press the ‘OK’ button.
6. The connection will be tested. If correct, the notification ‘Connected’ will appear.
Also, an ‘IP-Address’ and ‘Submask’ will be shown. Press the ‘OK’ button.
7. Press the ‘Home’ button to return to the main menu.
7.4.2 Wired connection - Manually
In case your network does not have a DHCP server, or you want to manually ad an IP-
Address, you can use the following steps:
1. Use the navigation buttons to go to ‘Setup’ and press the ‘OK’ button.
2. Select ‘Network’.
3. Select ‘Wired Lan Setup’ and press the ‘OK’ button.
4. Choose ‘FIX IP (Manual)’ and press the ‘OK’ button.
5. Fill out a correct ‘IP-Address’ at ‘IP Address’. This IP-Address needs to be in
range with your network’s IP-Address.
6. Fill out a correct ‘Subnet Mask’ at ‘Subnet Mask’. This ‘Subnet Mask’ needs to be
the same as used in your network.
7. Fill out the ‘Default Gateway’ at ‘Default Gateway’. This Gateway is usually the
same as your router’s IP-Address.
8. Fill out a ‘DNS Server’ at ‘DNS Server IP address’. Preferably, you need to fill out
a DNS server which is in use by your provider.
9. Press the ‘OK’ button and choose ‘Yes’ at the ‘Save’ question. Press the ‘OK’
button again to save the settings.
10. Press the ‘Home’ button to return to the main menu.
7.4.3 Wireless connection
Use the following steps to connect to your wireless network using the built-in WIFI
module.