EM8030 – EM8031 Mini Powerline Adapter 500Mbps
| ENGLISH EM8030 – EM8031 Mini Powerline Adapter 500Mbps Table of contents 1.0 Introduction ........................................................................................................... 2 1.1 Packing contents ............................................................................................... 2 2.0 Connecting the Mini Powerline Adapters ............................................................... 3 3.0 Using the software ........................................................
| ENGLISH 2.0 Connecting the Mini Powerline Adapters Note: For the best performance, connect the powerline adapters directly to the mains. Don’t connect them to an extension cable or a power strip. If you want to share the current internet connection with other computers, or if you want to create your own network, the first step you need to take is connecting a powerline adapter to your computer. Use the following steps to connect a powerline adapter to your computer: 1.
| ENGLISH 3.1 Installing the software 1. 2. 3. 4. Take the supplied CD-ROM out of the packing. Insert the CD-ROM in your computer’s CD-ROM or DVD-player. The CD-ROM will start automatically. Follow the steps on your screen to install the software. 3.2 Securing your network using the software After installing the software, an icon on your desktop has been added. This icon is named ‘PLC Utility’. Double-click this icon to open the powerline software.
| ENGLISH 3.3 Add a new unsecured Powerline Mini to your already secured network If you have a secured Powerline Mini home network, and you wish to connect a new Powerline Mini adapter which is not secured yet, you will need to set the so-called ‘Network Name’ on this new adapter to add this new powerline adapter to your already secured network. The new Powerline Mini is directly connected to a computer. 1. If you are using a new computer, you need to install the software first.
| ENGLISH 5.0 LED indicators On : Power connected Off : No power connected Flash : Stand-by mode* (Green) (Green / Orange / Red) Flash : Powerline data traffic Green : Powerline connection quality is good Orange : Powerline connection quality is fair Red : Powerline connection quality is bad Off : No Powerline connection with other Powerline adapter On : Ethernet link detected Off : No Ethernet link detected Flash : Ethernet traffic detected (Green) symbol is flashing.
| ENGLISH 7.0 Service and support This users manual has been carefully written by Eminent’s technical experts. If you have problems installing or using the product, please fill out the support form at the website www.eminent-online.com/support. You can also contact us by phone. Below you will find a list with phone numbers for each supported country.
| ENGLISH Repairing of the device should be done by qualified Eminent staff. The warranty immediately voids when products have undergone self repair and/or by misuse. For extended warranty conditions, please visit our website at www.eminentonline.com/warranty. *Tip: Eminent manuals are written with great care. However, due to new technological developments it can happen that a printed manual does not longer contain the most recent information.
| ENGLISH 10.0 Declaration of Conformity To ensure your safety and compliance of the product with the directives and laws created by the European Commission you can obtain a copy of the Declaration of Conformity concerning your product by sending an e-mail message to: info@eminentonline.com.